[問題] HP/MP/EXP 內的 MP 永遠常滿

[men_lok]

論壇版本: 2.0.6
問題外掛: HP/MP/EXP 1.2.0

安裝後，MP 圖形那行永遠常滿，試著用數字來看 (用{postrow.POSTER_MP})
文字顯示也是常滿的，記得 MP 的減法好像是每次發文減少，按註冊時間還原

再來測試連發數篇文章，也沒有扣呢，但其他如 HP 等數值有增加

請問是否安裝錯了？要改那一段？謝謝解答~~~

[吉川拓也]

論壇版本: 2.0.6
問題外掛: HP/MP/EXP 1.2.0

安裝後，MP 圖形那行永遠常滿，試著用數字來看 (用{postrow.POSTER_MP})
文字顯示也是常滿的，記得 MP 的減法好像是每次發文減少，按註冊時間還原

再來測試連發數篇文章，也沒有扣呢，但其他如 HP 等數值有增加

請問是否安裝錯了？要改那一段？謝謝解答~~~

貼張圖片來看比較快瞭解你的狀況 !!
另外把你 CODE 貼上來看看(TPL)

[Martinet]

感覺是 php檔的問題 ...如果有問題的話..

把 viewtopic.php 也一併貼上來吧..(吉川說的TPL也貼一下好偵錯)

[men_lok]

代碼: 選擇全部

<tr> 
<td><img src="templates/Iris/images/level/mp.gif" alt="{postrow.POSTER_MP}" title="{postrow.POSTER_MP}" width="{postrow.POSTER_MP_WIDTH}" height="5" /><img src="templates/Iris/images/level/mp_end.gif" alt="" width="4" height="5" /></td> 
</tr>

這是顯示 MP 的 php 碼 (viewtopic_body.tpl)
至於 php 本身都是用原來下載的程式，只有變動了圖片和高度等 (當然也試過不變動圖片測試...同樣常滿呢...)

看來應該沒錯...也試過不變動開新的 phpbb 來測試...也一樣呢\r
要靠各位大大幫忙，謝謝解答 ^_______^

[men_lok]

忘了 viewtopic.php

代碼: 選擇全部

	$row_class = ( !($i % 2) ) ? $theme['td_class1'] : $theme['td_class2'];

之後加入這一行
	include($phpbb_root_path . 'includes/level_mod.'.$phpEx); //added for Level Mod (Mac)

另外一段就是這樣，沒有變動它呢\r

代碼: 選擇全部

		/* BEGIN LEVEL MOD */ 
		"POSTER_HP" => $level_hp, 
		"POSTER_HP_WIDTH" => $level_hp_percent, 
		"POSTER_HP_EMPTY" => ( 100 - $level_hp_percent ), 
		"POSTER_MP" => $level_mp, 
		"POSTER_MP_WIDTH" => $level_mp_percent, 
		"POSTER_MP_EMPTY" => ( 100 - $level_mp_percent ), 
		"POSTER_EXP" => $level_exp, 
		"POSTER_EXP_WIDTH" => $level_exp_percent, 
		"POSTER_EXP_EMPTY" => ( 100 - $level_exp_percent ), 
		"POSTER_LEVEL" => $level_level, 
		"POSTER_LEVEL_CLASSNAME" => $level_classname, 
		"POSTER_LEVEL_SKILLRATIO" => $level_skillratio,
		"POSTER_LEVEL_CLASSIMG" => $level_classimg,
		"POSTER_LEVEL_ELEMENT" => $element,
		/* END LEVEL MOD */

再次謝謝

另外忘了說，在 profile_view_body.tpl 內也是一樣不能正常顯示 MP，也是常滿的 (這表示應該是我安裝時程式 php 安裝錯了？)

[shihchieh]

你貼的這段並不是這個mod的計算部份~你要貼計算的部份才有辦法，應該是level.php這個檔(好像.....)

[men_lok]

謝謝，沒有更動該 php 東，以下是應該是計算 MP 的部份

代碼: 選擇全部

/* Determine MP 
* 
* MP is calculated by how long the user has been around 
* and how often they post. 
* 
* Max MP is based on level, and increases with level 
* Each post a user makes costs them mp, 
* and a user regenerates mp proportional to how 
* many days they have been registered 
* 
*/ 


//Number of days the user has been at the forums. 

if ($profileversion) { 
   $level_user_days = max(1, round( ( time() - $profiledata['user_regdate'] ) / 86400 )); 
} else { 
   $level_user_days = max(1, round( ( time() - $postrow[$i]['user_regdate'] ) / 86400 )); 
} 

/* The mp cost for one post. 
* Raising this value will generally decrease the current 
* mp for most posters. 
* This may be set to a decimal value (eg, 2, 2.1, 3.141596) 
* This should NOT be set to 0 
*/ 
$level_post_mp_cost = 2.5; 

/* This determines how much mp a user regenerates per day 
* Raising this value will generally increase the current 
* mp for most posters. 
* This may be set to a decimal value (eg, 3, 3.5, 2.71828) 
* This should NOT be set to 0 
*/ 
$level_mp_regen_per_day = 20; 

if($level_level < 1) 
{ 
   $level_mp = '0 / 0'; 
   $level_mp_percent = 0; 
} 
else 
{ 
   $level_max_mp = floor( (pow( $level_level, (1/4) ) ) * (pow( 10, pow( $level_level+2, (1/3) ) ) ) / (pi()) ); 
   if ($profileversion) { 
      $level_mp_cost = $profiledata['user_posts'] * $level_post_mp_cost; 
   } else { 
      $level_mp_cost = $postrow[$i]['user_posts'] * $level_post_mp_cost; 
   } 
    
   $level_mp_regen = max(1, $level_user_days * $level_mp_regen_per_day); 
    
   $level_cur_mp = floor($level_max_mp - $level_mp_cost + $level_mp_regen); 
   $level_cur_mp = max(0, $level_cur_mp); 
   $level_cur_mp = min($level_max_mp, $level_cur_mp); 
    
   $level_mp = $level_cur_mp . ' / ' . $level_max_mp; 
   $level_mp_percent = floor($level_cur_mp / $level_max_mp * 100 ); 
    
}

有發現，當我更改 $level_mp_regen_per_day = 20; 為比較小的數字發文後就可以減少 MP
原因是...？

謝謝 ^__^